DTA-2137C | PCI Express

Features

• DVB-S2 receiver supports two channels in QPSK / 8‑PSK mode or one channel in 16‑APSK / 32‑APSK mode
• Two ASI output ports can be used for monitoring or as independent output
• Reception and forwarding of BBFRAMEs
• Supports advanced DVB-S2 features: VCM, ACM, multiple input streams (MIS) and Generic Stream (GS)
• Dual LNB inputs or shared feed
• DVB-S2 demodulation compliant to EN302 307 and EN301 210, as well as legacy DVB-S support
• Implements all DVB-S2 modulation types including 16APSK and 32APSK
• Full LNB support with DiSEqC interface and 13V/18V 200mA supply (PCIe power) or 400mA with external power
• Each channel provides reception status: RF level, demodulation status, modulation type, code rate, MER, BER and error counts
• Programming interface (DTAPI) is fully compatible with other DekTec Digital-Video input adapters
• PCI Express x1

Applications

• Multi-purpose DVB-S/S2 receiver for analysis, monitoring and processing of satellite signals.
• Reception and local redistribution of satellite services using DekTec's MuxXpert software for remultiplexing and table adaptation.
• Professional satellite receiver that provides a complete transport stream for processing in your custom application.

Key Characteristics

Metrology 

Inputs and outputs

Software

PC requirements

Documents 

• DTA-2137C Leaflet   
• Application note - BBF reception  
• Application note - RF measurement  

Dektec models are most often differentiated by the sufix e.g. SD, SXP etc., where suffix specifies the SW licence

• SP = Stream Player (allows you to play/modulate transport stream files, so this makes sence for devices with Output interface)
• SXP = Stream Xpert (this is MPEG TS ANALYZER, what makes sence for Input devices)
• SLP = Stream Xper Lite (very limited alternative of SXP, de facto allowing mainly capturing MPEG TS, again makes sence for Input devices)
• RX = RFXpert RF signal analysys
• SY = SD Eye (video analyzer)
• J = Jitter
• DGL = Dongle license for non Dektec devices

Meaning of abreviations used in beginning of Dektec model names

• DTA = Dektec adapter (typically PCI, PCI-e)
• DTU = Dektec USB device both USB-2 and USB-3
• DTE = Dektec Ethernet standalone networked device
• DTC = Dektec software license