HOTLINE: + 421 905 606 027
Description
Details
Features
- Double buffering of a single logical TS on two network ports and combination of two redundant streams back into one, for highly-available system.
- Simultaneous hardware-assisted zero-jitter transmission and reception of multiple Transport Streams over IP networks.
- Checksum computation and validation, 2D FEC generation with programmable D and L in hardware.
- Advanced hardware-based IPv4 and IPv4 address matcher to offload the driver.
- Time stamping of incoming IP packets for jitter analysis and monitoring.
- Two 100/1000 IEEE 802.3ab network ports enhanced with hardware-accelerated DTV streaming functions
- Greatly simplifies generation and consumption of TS-over-IP streams in your custom application
- Facilitates working with redundant TS-over-IP streams for creating highly-available networks
- Encapsulation and decapsulation of TS-over-IP streams with FEC support
- Hardware-based IP address filtering
- On-board packet scheduling engine for zero-jitter playout
- IP packet timestamping for jitter analysis or smoothing
- Supports TCP/IP task offloading to save CPU cycles
- Free Windows and Linux SDK (DTAPI) is fully compatible with other DekTec digital-television adapters
- Standard Windows and Linux network driver so that DTA-2162 ports can be used as standard network interface
- PCI Express x4, low profile
- Low- and standard profile PCI brackets available
Applications
- High performance based encoding, transcoding and multiplexing systems with real-time FEC-protected IP input and output.
- IP jitter analysis using DtJitter.
- For a 24/7 monitoring solution unlimited (limited to the available bandwidth) IP ports can be used by the Xpect software.
- Monitoring of fully loaded Gigabit Ethernet links
- TS-over-IP processing of hundreds of streams
- Highly-available IP-based encoding, transcoding and multiplexing systems
- TS-over-IP stream station
Key Characteristics
| Standards | IEEE 802.3ab SMPTE 2022 IEEE 802.1Q |
| Data Rate | 100/1000Mbps auto |
| Transport Streams | Unlimited TS max 950Mbps per port |
| Protocols | IPv4 and IPv6 UDP, RTP (opt FEC) Unicast, Multicast, VLAN IGMPv3 |
| Buffer | 32MB/channel |
Inputs and outputs
| 2 Ethernet | RJ-45 |
| PCI Express | PCIe x4 |
Software
| StreamXpress | Play TS files and control modulation parameters |
| SpRcApi | StreamXpress remote control API for automated playout |
| StreamXpert | Analyze your received transport streams using our analyzer software |
| VF-REC | Advanced Transport-Stream/SDI Recorder |
| DekTec SDKs | Create your own full-custom application with the DTA-2162 |
PC requirements
| OS |
|
||||
| Processor | Core i5 minimum Core i7 recommended Or equivalent AMD CPUs |
Documents
- DTA-2162 Leaflet
- PDF DT-AN-IP-3 SMPTE 2022-7 Seamless Protection Switching
- DT-AN-IP-2 VLAN for DekTec Network Adapters
Dektec models are most often differentiated by the sufix e.g. SD, SXP etc., where suffix specifies the SW licence
- SP = Stream Player (allows you to play/modulate transport stream files, so this makes sence for devices with Output interface)
- SXP = Stream Xpert (this is MPEG TS ANALYZER, what makes sence for Input devices)
- SLP = Stream Xper Lite (very limited alternative of SXP, de facto allowing mainly capturing MPEG TS, again makes sence for Input devices)
- RX = RFXpert RF signal analysys
- SY = SD Eye (video analyzer)
- J = Jitter
- DGL = Dongle license for non Dektec devices
Meaning of abreviations used in beginning of Dektec model names
- DTA = Dektec adapter (typically PCI, PCI-e)
- DTU = Dektec USB device both USB-2 and USB-3
- DTE = Dektec Ethernet standalone networked device
- DTC = Dektec software license
Parameters
Parameters
| Form Factor | PCI Express |
|---|
