HOTLINE: + 421 905 606 027
Description
Details
Features
- Simultaneous zero-jitter transmission and reception of multiple Transport Streams over IP networks.
- With time-stamping of incoming IP packets for IP jitter analysis and two-dimensional FEC generation for outgoing packets, with programmable D and L, a perfect solution for network optimization.
- Three independent software controllable bi-directional BNC ports, operable in ASI or SDI mode, with individual status LEDs.
- General-purpose transmission and reception of Transport Streams over ASI links and IP networks
- IP encapsulation in accordance with SMPTE 2022-1 and 2022-2
- Zero-jitter playout of multiple TS-over-IP streams
- Source-specific multicast (SSM) support
- Generation of two-dimensional FEC with programmable dimensions D and L and block-aligned FEC linearization
- Re-ordering and error correction of TS-over-IP streams with programmable latency
- Time stamping of incoming IP packets to enable TS-over-IP jitter analysis
- Comes with NDIS network driver for Windows and Linux network driver
Applications
- IP jitter analysis using DtJitter.
- Using the StreamXpert and DtJitter software multiple TS over IP streams can be individually monitored and analyzed.
- For a 24/7 monitoring solution unlimited (limited to the available bandwidth) IP ports can be used by the Xpect software.
- In combination with MuxXpert you can real-time multiplex streams.
- Contribution, primary distribution over IP
- Multipurpose ASI/TS-over-IP stream station
- Jitter measurements of TS-over-IP streams
- General-purpose ASI and TS-over-IP inputs and outputs for OEM applications
Block Diagram
Key Characteristics
| IP | IEEE 802.3ab / SMPTE 2022 10/100/1000Mbps auto-sense Unlimited TS, max 600Mbps UDP, RTP (opt FEC) Unicast and Multicast |
| ASI | DVB-ASI (coax) EN50083-9 0 to 214 Mbps Resolution <1 bps |
| SDI | SMPTE 259M 270 Mbps 8 or 10 bit format |
| Buffer | 32MB/channel |
| Input return loss | >15dB |
Inputs and outputs
| Ethernet | RJ-45 |
| 3x ASI/SDI | 75-Ω BNC |
| PCI Express | PCIe x4 |
Software
| StreamXpress | Play TS files and control modulation parameters |
| SpRcApi | StreamXpress remote control API for automated playout |
| StreamXpert | Analyze your received transport streams using our analyzer software |
| SdEye | Advanced SDI signal monitoring software |
| VF-REC | Advanced Transport-Stream/SDI Recorder |
| DekTec SDKs | Create your own full-custom application with via the DTA-160 |
PC requirements
| OS |
|
||||
| Processor | Core i5 minimum Core i7 recommended Or equivalent AMD CPUs |
Documents
- DTA-2160 Leaflet
- DT-AN-IP-2 VLAN for DekTec Network Adapters
Dektec models are most often differentiated by the sufix e.g. SD, SXP etc., where suffix specifies the SW licence
- SP = Stream Player (allows you to play/modulate transport stream files, so this makes sence for devices with Output interface)
- SXP = Stream Xpert (this is MPEG TS ANALYZER, what makes sence for Input devices)
- SLP = Stream Xper Lite (very limited alternative of SXP, de facto allowing mainly capturing MPEG TS, again makes sence for Input devices)
- RX = RFXpert RF signal analysys
- SY = SD Eye (video analyzer)
- J = Jitter
- DGL = Dongle license for non Dektec devices
Meaning of abreviations used in beginning of Dektec model names
- DTA = Dektec adapter (typically PCI, PCI-e)
- DTU = Dektec USB device both USB-2 and USB-3
- DTE = Dektec Ethernet standalone networked device
- DTC = Dektec software license
Parameters
Parameters
| Form Factor | PCI Express |
|---|
