You have no items in your shopping cart.

More Views

DTE-3120 ASI-IN | Standalone

Networked DVB-ASI INPUT adapter
incl. DTE-PWR2

Ordering Information

  • DTE-3120 - Standalone ASI to IP converter.
  • DTE-3120-SX - Standalone ASI to IP converter with StreamXpert analyzer software.

Weight: 342 gr

Availability: In stock

1 326,-€

* Required Fields

1 326,-€




  • Standalone module can either be used as compact autonomous ASI to TS-over-IP gateway, or as remote I/O device for PC-based applications
  • SMPTE-2022 and DTAPI mode
  • Time stamping for monitoring applications
  • Power over Ethernet (PoE) support: No separate power feed required
  • External power supply available for use with a non-PoE enabled switch
  • Fail-over relays for input-to-output connection in case of power failure
  • Supports IP encapsulation and 2D FEC encoding according to SMPTE 2022-1 and SMPTE 2022-2
  • LCD status display shows device identifier, bitrate, IP/MAC address and status
  • Uniform software access to DekTec TS-over-IP-, PCI- and USB devices through DTAPI
  • Install up to 12 modules in 3U 19” rack space using the DekTec rack-mountable rail
  • Units can be mounted directly on a wall using a DIN rail


  • Autonomous DVB-ASI to TS-over-IP gateway
  • With DTE-3100: Tunnelling of ASI signals over LAN, WAN or the Internet
  • Remote DVB-ASI input adapter for server-based analysers, monitoring applications (Xpect)®, multiplexers and similar systems

Key characteristics

Function ASI to IP conversion
Control Webinterface
IP encapsulation IPv4
RTP (SMPTE 2022-2)
FEC SMPTE 2022-1
ASI to IP latency 1ms max
ASI specifications DVB-ASI (coax) EN50083-9
0 to 214 Mbps
Resolution <1 bps
Input return loss >15dB
Companion device DTE-3100 - IP to ASI

Inputs and outputs

Ethernet connector RJ-45
1x ASI in 75-Ω BNC
1x ASI out 75-Ω BNC (loop output)

PC Requirements

Windows XP, 2k3/2k8, Vista,
  7, 8/8.1, 10
Linux  ≥2.6.18, 3.x, 4.x
Processor Core i5 minimum
Core i7 recommended

Or equivalent AMD CPUs


  • DTE-3120 Leaflet   
  • DTE MIB     
  • ASI MIB.     

Dektec models are most often differentiated by the sufix e.g. SD, SXP etc., where suffix specifies the SW licence
  • SP = Stream Player (allows you to play/modulate transport stream files, so this makes sence for devices with Output interface)
  • SXP = Stream Xpert (this is MPEG TS ANALYZER, what makes sence for Input devices)
  • SLP = Stream Xper Lite (very limited alternative of SXP, de facto allowing mainly capturing MPEG TS, again makes sence for Input devices)
  • RX = RFXpert RF signal analysys
  • SY = SD Eye (video analyzer)
  • J = Jitter
  • DGL = Dongle license for non Dektec devices
Meaning of abreviations used in beginning of Dektec model names
  • DTA = Dektec adapter (typically PCI, PCI-e)
  • DTU = Dektec USB device both USB-2 and USB-3
  • DTE = Dektec Ethernet standalone networked device
  • DTC = Dektec software license



Manufacturer DekTec
Form Factor Standalone


Write Your Own Review

You're reviewing: DTE-3120 ASI-IN | Standalone

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.